The working principle of
Our aseptic diaphragm valve system by widely tested weir diaphragm valve and with related with instructions and the control of the actuators and diaphragm.
The standard design
Through the modular design aseptic diaphragm valve, almost all of the possible configuration is feasible.
Valve consists of the following parts: - manual or pneumatic execution device
Diaphragm - have all kinds of soft and hard degree of PTFE/EPDM and so on.
Body - is the standard type two-way valve, but also can be other configuration. Body can be according to the several kinds of surface finish, according to the different interfaces provide fittings.
Specifications: 1 '4', DN25 - DN100
Connection mode: welding, clamp, thread, flange
Material: 304/316 l
Packing: standard EPDM and silicone, fluorine rubber, tetrafluoroethylene can choose
Works: manual and pneumatic
Sandblasting surface treatment: mirror inside
Temperature range: - 10 ℃ to + 135 ℃
The maximum product pressure: 10 bar
Minimum pressure of products: vacuum
